I wait anxiously every Saturday on the new block.
instructions Capri Sun Bags
For the small bag you need 10 bags. I did not cut, flushed only by the straw hole with water and allow to dry overnight.
the zigzag stitch should be adjusted in length to 3 mm and the width of 5mm.
It is advisable to take a stronger sewing machine needle (Jean needle).
First, sew the front and back, in each case define the packaging, right above the other, so that the edges sewn together is 1 / 4 "(0.06 mm) overlap. With a zigzag stitch.
The pages left to turn left onto front and back sides and also put together with a zigzag stitch, so that a prominent seam is formed.
For the two handles, two Packaging cut in length, sew the short ends of the two halves overlapping. Then the long sides of the strip folded inwards so that nachbleibt only 1 / 3 of the width and stitch both sides with a lock stitch.
The upper edge of the pocket pieces, 1 / 2 "(1.3 cm) were handled internally and festgesteppt, mitfassen while the handle. For keeping together is very helpful crepe, pins can be used for bad ;-)
are placed one on the ground 2 packages so and sewn to a rectangle formed in the required size.
It is recommended that each page for land at the Pocket Part to (zigzag) stitch and start with the side panels. Seam beginning and end well with back stitches.
for the large bag I used 19 packets: 6 for each front and rear, each with 2 of each for the sides and 3 for the ground which can be slid over one another to fit the pocket width. To handle the large bag I have made my belt (there's yards of Karstadt). In this case proceed in the same order at the front and back of the first transverse rows (3 bags together) sew, then sew together the two on the sides.
I hope the guide was saying. Have fun sewing!
Brigitte